Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/5796
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKarataş, C.-
dc.contributor.authorGökten, M.-
dc.contributor.authorÜnal, H. I.-
dc.contributor.authorSarıtaş, S.-
dc.contributor.authorUslan, I.-
dc.date.accessioned2021-09-11T15:20:05Z-
dc.date.available2021-09-11T15:20:05Z-
dc.date.issued2005en_US
dc.identifier.citationEuropean Powder Metallurgy Congress and Exhibition, Euro PM 2005, 2 October 2005 through 5 October 2005, Prague, 105455en_US
dc.identifier.isbn9781899072187-
dc.identifier.urihttps://hdl.handle.net/20.500.11851/5796-
dc.description.abstractIn this study, the rheological characteristics of the feedstocks produced from steatite powder and from 316L stainless steel powder with polyethylene glycol (PEG) based binders have been investigated. The suitable temperature and pressure conditions for feedstocks have been determined for powder injection moulding (PIM). Five different binder compositions have been used in this research. PEG was the main constituent of each binder. The constituents of the binders are PEG 3000 and PEG 8000, high density polyethylene (HDPE), polypropylene (PP) and stearic acid (SA). The feedstocks produced from steatite powder (45-60 vol%) and from 316L (60-70 vol%) have been tested in a capillary rheometer. It has been concluded that for PIM, the critical powder ratios for the steatite powder and 316L were 53% and 66%, respectively. For steatitebased feedstocks, the shear rates were changed within the range of 65-4093 s-1 and the viscosities were changed within the range of 20-1722 Pas. For 316L-based feedstocks, the shear rates were changed within the range of 119-185 s-1 and the viscosities were changed within the range of 319-494 Pas. It has been observed that the viscosity is shear-rate dependant in both feedstocks with pseudoplastic behaviour.en_US
dc.description.sponsorshipEuropean Powder Metallurgy Associationen_US
dc.language.isoenen_US
dc.publisherEuropean Powder Metallurgy Association (EPMA)en_US
dc.relation.ispartofEuro PM 2005: Powder Metallurgy Congress and Exhibitionen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.titleInvestigation of rheological properties of the feedstocks composed of steatite and 316l stainless steel powders and peg based resinsen_US
dc.typeConference Objecten_US
dc.departmentFaculties, Faculty of Engineering, Department of Mechanical Engineeringen_US
dc.departmentFakülteler, Mühendislik Fakültesi, Makine Mühendisliği Bölümütr_TR
dc.identifier.volume2en_US
dc.identifier.startpage375en_US
dc.identifier.endpage381en_US
dc.identifier.scopus2-s2.0-84901926254en_US
dc.institutionauthorSarıtaş, Süleyman-
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.relation.conferenceEuropean Powder Metallurgy Congress and Exhibition, Euro PM 2005en_US
item.cerifentitytypePublications-
item.fulltextNo Fulltext-
item.grantfulltextnone-
item.openairetypeConference Object-
item.languageiso639-1en-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
Appears in Collections:Makine Mühendisliği Bölümü / Department of Mechanical Engineering
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Show simple item record



CORE Recommender

Page view(s)

104
checked on Nov 11, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.