| Issue Date | Title | Author(s) |
| 2011 | A Numerical Investigation of the Effects of a Transverse Temperature Gradient on the Formation of Regular and Irregular Acoustic Streaming in an Enclosure | Aktas, M. K.; Özgümüş, T. |
| 2012 | A Numerically Efficient Frequency Domain Method for Analysis of Non-Linear Multi Degree of Freedom Systems | Özer, M.B. |
| 2017 | A Novel Alternating Cell Directions Implicit Method for the Solution of Incompressible Navier Stokes Equations on Unstructured Grids | Baş, Onur; Çete, A. R.; Mengi, S.; Tuncer, İsmail H.; Kaynak, Ünver |
| 2013 | A Non-Linear Elastic-Plastic Stress Analysis in a Ductile Double-Lap Joint | Sayman, Onur; Özen, Mustafa; Özel, Adnan; Demir, Teyfik ; Korkmaz, Behiye |
| 2020 | A Novel Artificial Pancreas: Energy Efficient Valveless Piezoelectric Actuated Closed-Loop Insulin Pump for T1dm | Kaçar, Alp; Özer, Mehmet Bülent ; Taşcıoğlu, Yiğit |
| 2011 | A Micro-Damage Investigation on a Low-Alloy Steel Tested Using a 7.62-Mm Ap Projectile | Demir, Teyfik ; Übeyli, Mustafa |
| 2014 | A Mach-Uniform Preconditioner for Incompressible and Subsonic Flows | Baş, Onur; Tuncer, İsmail H.; Kaynak, Ünver |
| 2018 | A Correlation-Based Algebraic Transition Model | Çakmakcıoğlu, Samet Caka; Baş, Onur; Kaynak, Ünver |
| 2021 | A Crystal Plasticity Based Finite Element Framework for Rve Calculations of Two-Phase Materials: Void Nucleation in Dual-Phase Steels | Yalçınkaya, Tuncay; Çakmak, Serhat Onur; Tekoğlu, Cihan |
| 2009 | A Comparative Study of Design Optimisation Methodologies for Side-Impact Crashworthiness, Using Injury-Based Versus Energy-Based Criterion (vol 14, Pg 125, 2009) | Horstemeyer, M. F.; Ren, X. C.; Fang, H.; Acar, Erdem ; Wang, P. T. |
| 2014 | 2-D and 3-D Cfd Investigation of Nrel S826 Airfoil at Low Reynolds Numbers | Çakmakcıoğlu, S. C.; Sert, İ. O.; Tuğluk, O.; Sezer, Uzol, N. |
| 2013 | 33 Numerical Study of Turbulence Nanofluid Flow To Distinguish Models for In-House Programming | Tongkratoke, Amarin; Pramuanjaroenkij, Anchasa; Chaengbamrung, Apichart; Kakaç, Sadık |
| 2017 | Utilization of Numerical Methods and Experiments for the Design and Tests of Gasketed Plate Heat Exchangers | Aradağ S.; Kakaç, Sadık ; Özkaya E. |
| 2015 | Urans and Les Cfd Simulations of Swirl Stabilized Non-Premixed Tecflam Combustor | Solmaz, M. B.; Uslu, S. |
| 2014 | Unsteady Rans for Simulation of High Swirling Non-Premixed Methane-Air Flame | Solmaz, M. B.; Uslu, S. ; Uzol, O. |
| 2009 | Unsteady Navier Stokes Solutions of Low Aspect Ratio Rectangular Flat Wings in Compressible Flow | Durmuş, G.; Kavsaoğlu, M. Ş.; Kaynak, Ünver |
| 2013 | Uniaxial Mechanical Response of Polycrystalline Shape Memory Alloys | Babacan, Nazım; Özsoy, İstemi Barış |
| 2012 | Transition at Low-Re Numbers for Uav Type Airfoils at High Subsonic Mach Numbers | Çakmakçıoğlu, Samet Çaka; Kaynak, Ünver ; Genç, M. S. |
| 2021 | The Role of Intermetallic Particles on Mode I Crack Propagation Mechanisms in Metal Plates | Tekoğlu, C. ; Çelik, Ş.; Duran, H. ; Efe, M.; Baier-Stegmaier, S.; Nielsen, K. L. |
| 2015 | The Pullout Performance of Pedicle Screws | Demir, Teyfik ; Başgül, C. |
