Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/7047
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLevitas, Valery I.-
dc.contributor.authorÖzsoy, İstemi Barış-
dc.date.accessioned2021-09-11T15:45:09Z-
dc.date.available2021-09-11T15:45:09Z-
dc.date.issued2009en_US
dc.identifier.issn0749-6419-
dc.identifier.issn1879-2154-
dc.identifier.urihttps://doi.org/10.1016/j.ijplas.2008.02.004-
dc.identifier.urihttps://hdl.handle.net/20.500.11851/7047-
dc.description.abstractThe universal (i.e. independent of the constitutive equations) thermodynamic driving force for coherent interface reorientation during first-order phase transformations in solids is derived for small and finite strains. The derivation is performed for a representative volume with plane interfaces, homogeneous stresses and strains in phases and macroscopically homogeneous boundary conditions. Dissipation function for coupled interface (or multiple parallel interfaces) reorientation and propagation is derived for combined athermal and drag interface friction. The relation between the rates of single and multiple interface reorientation and propagation and the corresponding driving forces are derived using extremum principles of irreversible thermodynamics. They are used to derive complete system of equations for evolution of martensitic microstructure (consisting of austenite and a fine mixture of two martensitic variants) in a representative volume under complex thermomechanical loading. Viscous dissipation at the interface level introduces size dependence in the kinetic equation for the rate of volume Fraction. General relationships for a representative volume with moving interfaces under piece-wise homogeneous boundary conditions are derived. It was found that the driving force for interface reorientation appears when macroscopically homogeneous stress or strain are prescribed, which corresponds to experiments. Boundary conditions are satisfied in,in averaged way. In Part 2 of the paper [Levitas, V.I., Ozsoy, I.B., 2008. Micromechanical modeling of stress-induced phase transformations. Part 2. Computational algorithms and examples. Int. J. Plasticity (2008)], the developed theory is applied to the numerical modeling of the evolution of martensitic microstructure under three-dimensional thermomechanical loading during cubic-tetragonal and tetragonal-orthorhombic phase transformations. (C) 2008 Elsevier Ltd. All rights reserved.en_US
dc.description.sponsorshipNSFNational Science Foundation (NSF) [CMS-0555909]; LANLUnited States Department of Energy (DOE)Los Alamos National Laboratory; TTUen_US
dc.description.sponsorshipNSF (CMS-0555909), LANL, and TTU support as well as collaboration with Dean Preston (LANL) are gratefully acknowledged.en_US
dc.language.isoenen_US
dc.publisherPergamon-Elsevier Science Ltden_US
dc.relation.ispartofInternational Journal of Plasticityen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPhase transformationen_US
dc.subjectTwinningen_US
dc.subjectConstitutive behaviouren_US
dc.titleMicromechanical modeling of stress-induced phase transformations. Part 1. Thermodynamics and kinetics of coupled interface propagation and reorientationen_US
dc.typeArticleen_US
dc.departmentFaculties, Faculty of Engineering, Department of Mechanical Engineeringen_US
dc.departmentFakülteler, Mühendislik Fakültesi, Makine Mühendisliği Bölümütr_TR
dc.identifier.volume25en_US
dc.identifier.issue2en_US
dc.identifier.startpage239en_US
dc.identifier.endpage280en_US
dc.authorid0000-0003-1795-0267-
dc.authorid0000-0001-8556-4419-
dc.identifier.wosWOS:000262201900003en_US
dc.identifier.scopus2-s2.0-55549099580en_US
dc.institutionauthorÖzsoy, İstemi Barış-
dc.identifier.doi10.1016/j.ijplas.2008.02.004-
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.scopusqualityQ1-
item.languageiso639-1en-
item.fulltextNo Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.grantfulltextnone-
item.openairetypeArticle-
item.cerifentitytypePublications-
crisitem.author.dept02.7. Department of Mechanical Engineering-
Appears in Collections:Makine Mühendisliği Bölümü / Department of Mechanical Engineering
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Show simple item record



CORE Recommender

SCOPUSTM   
Citations

84
checked on Nov 2, 2024

WEB OF SCIENCETM
Citations

84
checked on Oct 26, 2024

Page view(s)

52
checked on Oct 28, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.