Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/5719
Full metadata record
DC FieldValueLanguage
dc.contributor.authorÖzaslan, E.-
dc.contributor.authorİncecik, B. B.-
dc.contributor.authorYetgin, A.-
dc.contributor.authorAcar, Bülent-
dc.contributor.authorGüngör, S.-
dc.contributor.authorSapancı, E.-
dc.contributor.authorGüler, Mehmet Ali-
dc.date.accessioned2021-09-11T15:19:45Z-
dc.date.available2021-09-11T15:19:45Z-
dc.date.issued2021en_US
dc.identifier.issn2666-6820-
dc.identifier.urihttps://doi.org/10.1016/j.jcomc.2021.100119-
dc.identifier.urihttps://hdl.handle.net/20.500.11851/5719-
dc.description.abstractThe difference in stiffness between cylindrical and dome regions of a filament wound composite pressure vessel may cause undesirable bending in the cylinder-dome transition region. Because of the bending, strain distribution may be non-uniform in the transition region. Therefore, accurate modeling that captures non-uniform strain distribution in the transition region is crucial for a safe pressure vessel design. In this study, a pressure vessel with a metallic liner was designed. Three identical pressure vessels were manufactured. One of the vessels was cut for detailed geometric investigation. The section of the transition region was investigated using an optical microscope. The termination of each hoop layer and resin pockets under the helical layers were clearly observed at the micro-scale. Also, measurement of layer by layer thickness and fiber volume fraction were performed. Other vessels were pressurized until the burst pressure. Fiber direction strain was measured using strain gauges that were mostly attached to the transition region to capture the non-uniform strain distribution. Two finite element models were created to analyze the transition region. The first finite element model was created with design parameters. The second finite element model was established by considering the findings obtained from the microscopic analysis. Strain distributions obtained from the strain gauges and finite element analyses were compared. In contrast to the first finite element model, strain distribution in the transition region was perfectly matched with the second finite element model. Thus, important aspects of analyzing the transition region of a pressure vessel were addressed for designers. © 2021 The Author(s)en_US
dc.language.isoenen_US
dc.publisherElsevier B.V.en_US
dc.relation.ispartofComposites Part C: Open Accessen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectComposite pressure vesselsen_US
dc.subjectCylinder-dome transition regionen_US
dc.subjectFilament wound compositesen_US
dc.subjectFinite element analysisen_US
dc.subjectPressure testen_US
dc.subjectStrain gauge measurementen_US
dc.titleExperimental and numerical investigation of the cylinder-dome transition region of a pressure vesselen_US
dc.typeArticleen_US
dc.departmentFaculties, Faculty of Engineering, Department of Mechanical Engineeringen_US
dc.departmentFakülteler, Mühendislik Fakültesi, Makine Mühendisliği Bölümütr_TR
dc.identifier.volume4en_US
dc.identifier.wosWOS:000819142500041en_US
dc.identifier.scopus2-s2.0-85107157689en_US
dc.institutionauthorGüler, Mehmet Ali-
dc.identifier.doi10.1016/j.jcomc.2021.100119-
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.scopusqualityQ2-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.grantfulltextnone-
item.fulltextNo Fulltext-
item.openairetypeArticle-
item.cerifentitytypePublications-
item.languageiso639-1en-
crisitem.author.dept02.7. Department of Mechanical Engineering-
Appears in Collections:Makine Mühendisliği Bölümü / Department of Mechanical Engineering
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Show simple item record



CORE Recommender

Page view(s)

102
checked on Mar 25, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.