Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/5829
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKılıç, G.-
dc.contributor.authorÖgel, B.-
dc.contributor.authorDurlu, N.-
dc.date.accessioned2021-09-11T15:20:15Z-
dc.date.available2021-09-11T15:20:15Z-
dc.date.issued2013en_US
dc.identifier.citationInternational Powder Metallurgy Congress and Exhibition, Euro PM 2013, 15 September 2013 through 18 September 2013, , 110976en_US
dc.identifier.isbn9781899072408-
dc.identifier.urihttps://hdl.handle.net/20.500.11851/5829-
dc.description.abstractIn this study, the effect of sinter hardening on the mechanical properties of Distaloy DH (Fe-2Cu-1.5Mo) powder with 0.4%, 0.6%, and 0,8% graphite additions, was investigated. Powder samples were pressed under 600 MPa, and sintered at 1120°C under endogas from methane for 20 minutes in an industrial sintering furnace. After sintering the samples were cooled with three different cooling rates (0.5oC/sec,1.5oC/sec, and 3oC/sec). Microstructural characterization of samples were done with optical and electron microscopy. Selective etching was utilized in determining the amount of pearlite in samples. The study showed that after sintering a cooling rate of 0.5°C/s led to decreasing amounts of pearlite in all the Distaloy DH samples. With increase in the cooling rates to 3°C/s, Distaloy DH-0.4%C sample contains small amount of pearlite, whereas the alloys Distaloy DH-0.6%C and Distaloy DH-0.8%C led to bainitic and martensitic microstructures.en_US
dc.language.isoenen_US
dc.publisherEuropean Powder Metallurgy Association (EPMA)en_US
dc.relation.ispartofInternational Powder Metallurgy Congress and Exhibition, Euro PM 2013en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMechanical propertiesen_US
dc.subjectMicrostructureen_US
dc.subjectPowder metallurgyen_US
dc.subjectSinter hardeningen_US
dc.titleMicrostructural investigation of sinter hardened distaloy-DH powder alloysen_US
dc.typeConference Objecten_US
dc.departmentFaculties, Faculty of Engineering, Department of Mechanical Engineeringen_US
dc.departmentFakülteler, Mühendislik Fakültesi, Makine Mühendisliği Bölümütr_TR
dc.identifier.scopus2-s2.0-85067718744en_US
dc.institutionauthorDurlu, Nuri-
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.relation.conferenceInternational Powder Metallurgy Congress and Exhibition, Euro PM 2013en_US
item.fulltextNo Fulltext-
item.languageiso639-1en-
item.openairetypeConference Object-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.cerifentitytypePublications-
item.grantfulltextnone-
crisitem.author.dept02.7. Department of Mechanical Engineering-
Appears in Collections:Makine Mühendisliği Bölümü / Department of Mechanical Engineering
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Show simple item record

CORE Recommender

Page view(s)

24
checked on Dec 26, 2022

Google ScholarTM

Check

Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.