Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/1491
Title: Modeling and analysis of surface roughness of microchannels produced by mu-WEDM using an ANN and Taguchi method
Authors: Jafari, Rahim
Kahya, Müge
Oliaei, Samad Nadimi Bavil
Ünver, Hakkı Özgür
Özyurt, Tuba Okutucu
180394
Keywords: Microchannel
Surface roughness
Taguchi method
Wire electrical discharge machining
Issue Date: Nov-2017
Publisher: Korean Soc Mechanical Engineers
Source: Jafari, R., Kahya, M., Oliaei, S. N. B., Ünver, H. Ö., & Özyurt, T. O. (2017). Modeling and analysis of surface roughness of microchannels produced by ?-WEDM using an ANN and Taguchi method. Journal of Mechanical Science and Technology, 31(11), 5447-5457.
Abstract: Microchannel heat exchangers are used to remove the high heat fluxes generated in compact electronic devices. The roughness of the microchannels has a significant effect on the heat transfer characteristics, especially the nucleate boiling and pumping power. Therefore, development of predictive models of surface texture is of significant importance in controlling heat transfer characteristics of these devices. In this study, micro-Wire electrical discharge machining (mu-WEDM) was employed to fabricate metal-based microchannel heat sinks with different surface textures. First, experiments were conducted to achieve the desired surface roughness values. Oxygen-free copper is a common material in the cooling systems of electronic devices because of its high thermal conductivity and low cost. Design of experiment approach based on the Taguchi technique was used to find the optimum set of process parameters. An analysis of variance is also performed to determine the significance of process parameters on the surface texture. An artificial neural network model is utilized to assess the variation of the surface roughness with process parameters. The predictions are in very good agreement with results yielding a coefficient of determination of 99.5 %. The results enable to determine mu-WEDM parameters which can result in the desired surface roughness, to have a well-controlled flow and heat transfer characteristics for the microchannels.
URI: https://link.springer.com/article/10.1007/s12206-017-1039-7
https://hdl.handle.net/20.500.11851/1491
ISSN: 1738-494X
Appears in Collections:Makine Mühendisliği Bölümü / Department of Mechanical Engineering
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection

Show full item record

CORE Recommender

SCOPUSTM   
Citations

12
checked on Sep 23, 2022

WEB OF SCIENCETM
Citations

13
checked on Sep 24, 2022

Page view(s)

24
checked on Oct 3, 2022

Google ScholarTM

Check

Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.