Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/1553
Title: Numerical Study Of Turbulence Nanofluid Flow To Distinguish Multiphase Flow Models For In-House Programming
Authors: Pramuanjaroenkij, Anchasa
Tongkratoke, Amarin
Kakaç, Sadık
143565
Keywords: Nanofluid
Tubulence flow
Heat transfer enhancement
Two-phase model
Issue Date: 2017
Publisher: Amer Soc Mechanical Engineers
Source: Pramuanjaroenkij, A., Tongkratoke, A., & Kakaç, S. (2016, November). Numerical Study of Turbulence Nanofluid Flow to Distinguish Multiphase Flow Models for In-House Programming. In ASME 2016 International Mechanical Engineering Congress and Exposition (pp. V008T10A080-V008T10A080). American Society of Mechanical Engineers.
Abstract: Fluid flow with particles are found in many engineering applications such as flows inside lab-on-a-chips and heat exchangers. In heat exchangers, nanofluids or base fluids mixed with nanoparticles are applied to be used as the working fluid instead of the traditional base fluids which have low thermal physical properties. The nanoparticle diameters are in the range from 1 to 100 nanometers are mixed with the traditional base fluids before they are applied inside the heat exchangers and the nanofluids have been proved continually that they enhance heat transfer rates of the heat exchangers. Turbulent and laminar nanofluid flows have shown different enhancements in different conditions. This work focused on comparing different turbulent nanofluid simulations which used the computational fluid dynamics, CFD, with different multiphase models. The Realizable k-s turbulence model coupled with three multiphase models; Volume of Fluid (VOF) model, Mixture model and Eulerian model, were considered and compared. The heat exchanger geometry in the work was rectangular as in the electrical device application and the nanofluid was a mixture between A1203 and water. All simulated results, then, were compared with experimental results. The comparisons showed that numerical results did not deviate from each other but their delivered-time consumptions and complications were different. If one develops his own code, Eulerian model was the most complicated while Mixture model and Eulerian model consumed longer performing times. Although the Eulerian model delivered-time consumption was long but it provided the best results, so the Eulerian model should be chosen when time consumption and errors play important roles. From this ordinary study, the first significant step of in-house program developments has started. The time consumption still indicated that the high performance computers should be selected, and properties obtained from the experimental studies should be imported to the simulation to increase the result accuracy.
URI: http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=2602603
https://hdl.handle.net/20.500.11851/1553
ISBN: 978-0-7918-5062-6
Appears in Collections:Makine Mühendisliği Bölümü / Department of Mechanical Engineering
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection

Show full item record

CORE Recommender

Page view(s)

220
checked on Feb 6, 2023

Google ScholarTM

Check

Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.