Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/2152
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorDemirci, Nurdan Sankır-
dc.contributor.advisorSankır, Mehmet-
dc.contributor.authorCan, Emre Kaan-
dc.date.accessioned2019-12-25T06:49:46Z-
dc.date.available2019-12-25T06:49:46Z-
dc.date.issued2017
dc.identifier.citationCan, E. (2017). Foto elektrokimyasal hidrojen üretimi uygulamarı için elektrot dizaynı ve performans ölçümü. Ankara: TOBB ETÜ Fen Bilimleri Enstitüsü. [Yayınlanmamış yüksek lisans tezi]en_US
dc.identifier.urihttps://hdl.handle.net/20.500.11851/2152-
dc.identifier.urihttps://tez.yok.gov.tr/UlusalTezMerkezi/tezSorguSonucYeni.jsp-
dc.description.abstractElectrolysis of water by using solar energy via photo electrochemical methods and production of hydrogen gas are studied by science authority, increasing day by day. In this thesis, all studies have same goal with alternative approaches. Hydrogen gas cannot stand in nature by itself. Because of that, it must be produced as energy carrier and called secondary energy source. Traditional hydrogen gas production methods are steam reforming, coal gasification, etc. But all these methods are not preferred because of main constituent, fossil fuel, harming and polluting environment. Photo electrochemical (PEC) solar cells are nature friendly because they are completely reversible and have photoactive electrodes submerged under electrolyte liquid to produce electron-hole pair from water molecules decomposed oxygen and hydrogen. Decomposed oxygen and hydrogen gases are accumulated and stored in different medium for different usage. In this thesis, three different photo-anode configurations and two different electrolyte solutions were studied to use in photo electrochemical systems. Indium sulfide (In2S3) photo-anodes were produced via spray pyrolysis method with different coating thickness and tested under 0.5M Potassium Sulfate (K2SO4) solution. Zinc Oxide nanostructure films produced via chemical bath deposition (CBD) method were coated with Indium Sulfide to increase photo sensibility and tested under 0.25M Na2S + 0.35M Na2SO3 Sodium Sulfide solution. Properties of absorption of solar energy, electrical conductivity, stability, etc. are affected by Indium Sulfide coating thickness. The other one, pH of the electrolyte solution, directly affects the performance of photo electrochemical system. The last one, Indium Sulfide coating on Zinc Oxide increases the photocurrent density affecting photo electrochemical performance.en_US
dc.description.abstractBu tez kapsamında bilim dünyasında gün geçtikçe daha çok fark edilen, güneş enerjisinin foto elektrokimyasal yöntemler aracılığı ile suyun elektrolizinde kullanılması ve böylece hidrojen gazı (H2) üretilmesi üzerinde çalışılmıştır. Hidrojen gazı doğada tek başına bulunmadığından üretilmesi gereken enerji taşıyıcısı veya ikincil enerji kaynağıdır. Hidrojen üretiminde geleneksel olarak buhar düzeltimi (steam reforming) ya da kömür gazlaştırma (coal gasification) gibi metotlar kullanılmaktadır. Ancak bu yöntemler fosil yakıt kullanımı ve dolayısıyla çevreye verdikleri zarardan ötürü tercih edilmemektedir. Foto elektrokimyasal (photo electrochemical "PEC") güneş pilleri ise tamamıyla yenilenebilir kaynak kullanımından ötürü çevre dostu olup temel olarak elektrolit sıvısı içine yerleştirilen foto aktif elektrotlar üzerinde elektron-boşluk çiftlerinin oluşturulması ile su moleküllerinin parçalanarak hidrojen ile oksijeni ayırmakta kullanılırlar. Ayrılan bu iki gaz daha sonra farklı ortamlarda biriktirilmekte ve toplanmaktadır. Bu çalışmada foto elektrokimyasal sistemlerde kullanılmak üzere üç farklı foto anot konfigürasyonu ve iki farklı elektrolit kullanılmıştır. İndiyum sülfür (In2S3) foto anotlar sprey piroliz yöntemi ile farklı kalınlıklarda kaplanarak 0,5M potasyum sülfat (K2SO4) çözeltisi içinde test edilmiştir. Kimyasal banyo depolama yöntemi ile hazırlanan çinko oksit (ZnO) nano yapılı filmler In2S3 ile kaplanarak foto hassasiyetleri arttırılmış ve bu anotlar 0,25M Na2S + 0,35M Na2SO3 çözeltisi içinde test edilmiştir. Yapılan çalışmalar doğrultusunda In2S3 foto anotların kalınlıklarının ışık soğurma, elektriksel iletkenlik, dayanım gibi özellikleri etkilediği ayrıca kullanılan elektrolit solüsyonunun pH değerinin foto elektrokimyasal verimi doğrudan etkilediği saptanmıştır. Bunların yanı sıra ZnO nano elektrotların In2S3 ile kaplanması ile fotoakım yoğunluğu dolayısıyla PEC verimi arttırılabilmiştiren_US
dc.language.isotren_US
dc.publisherTOBB University of Economics and Technology,Graduate School of Engineering and Scienceen_US
dc.publisherTOBB ETÜ Fen Bilimleri Enstitüsütr_TR
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectHydrogen production via photo electrochemical methodsen_US
dc.subjectIndium sulfideen_US
dc.subjectZinc oxideen_US
dc.subjectPhoto electrochemical performanceen_US
dc.subjectHydrolysisen_US
dc.subjectpHen_US
dc.subjectClean energyen_US
dc.subjectPerformanceen_US
dc.subjectYielden_US
dc.subjectPotassium sulphateen_US
dc.subjectCoatingen_US
dc.subjectFoto elektrokimyasal yöntemlerle hidrojen üretimitr_TR
dc.subjectHidroliztr_TR
dc.subjectpHtr_TR
dc.subjectKaplamatr_TR
dc.subjectTemiz enerjitr_TR
dc.subjectPerformanstr_TR
dc.subjectVerimtr_TR
dc.subjectİndiyum sülfürtr_TR
dc.subjectPotasyum sülfattr_TR
dc.subjectÇinko oksittr_TR
dc.titleFoto elektrokimyasal hidrojen üretimi uygulamarı için elektrot dizaynı ve performans ölçümüen_US
dc.title.alternativePerformance measurement and electrode design for application of photo electrochemical hydrogen productionen_US
dc.typeMaster Thesisen_US
dc.departmentInstitutes, Graduate School of Engineering and Science, Micro and Nanotechnology Graduate Programsen_US
dc.departmentEnstitüler, Fen Bilimleri Enstitüsü, Mikro ve Nanoteknoloji Ana Bilim Dalıtr_TR
dc.relation.publicationcategoryTezen_US
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.grantfulltextopen-
item.fulltextWith Fulltext-
item.openairetypeMaster Thesis-
item.cerifentitytypePublications-
item.languageiso639-1tr-
Appears in Collections:Mikro ve Nanoteknoloji Yüksek Lisans Tezleri / Micro- and Nano-Technology Master Theses
Files in This Item:
File Description SizeFormat 
486614.pdf2.8 MBAdobe PDFThumbnail
View/Open
Show simple item record



CORE Recommender

Page view(s)

192
checked on Mar 25, 2024

Download(s)

44
checked on Mar 25, 2024

Google ScholarTM

Check





Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.