Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/3952
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorSankır, Nurdan Demirci-
dc.contributor.authorŞahsuvar, Nazire Simay-
dc.date.accessioned2020-12-15T08:57:33Z
dc.date.available2020-12-15T08:57:33Z
dc.date.issued2019
dc.identifier.citationŞahsuvar, N. (2019).Sprey piroliz yöntemiyle Cu(In,Ga)(S,Se)2 ince film foto elektrokimyasal güneş hücrelerinin geliştirilmesi. Ankara: TOBB ETÜ Fen Bilimleri Enstitüsü. [Yayınlanmamış yüksek lisans tezi]tr_TR
dc.identifier.urihttp://hdl.handle.net/20.500.11851/3952-
dc.description.abstractKüresel düzeyde artan enerji ihtiyacının yanı sıra, fosil yakıtlara dayanan geleneksel enerji kaynaklarının sınırlı olmasından dolayı, fotoelektrokimyasal güneş pillerinden elde edilen hidrojen enerjisinin umut verici düzeyde olduğu kabul edilmektedir. Bu umut vaat eden enerji alanında özellikle bir çok avantajı bulunan Cu(In,Ga)(S,Se)2 ince filmlerinin en ekonomik üretim yöntemlerinden biri olan sprey piroliz yöntemi ile geliştirilmesi üzerine çalışma gerçekleştirilmiştir. Bu kapsamda, ilk bölümde yenilenebilir enerji ve fotoelektrokimyasal güneş pilleri hakkında genel bir bilgi verildikten sonra ikinci bölümde farklı stokiyometrilerde ince filmlerin hazırlanması ve yapıların çeşitli karakterizasyonlar sonucu optimum stokiyometrideki Cu(In,Ga)(S,Se)2 bileşiğinin bulunması amaçlanmıştır. Üçüncü bölümde ise elde edilen Cu(In,Ga)(S,Se)2 katmanı üzerine In2S3 tabakası çıkılarak çok katmanlı eklem yapısı oluşturulmuş ve performans ölçümleri incelenmiştir. Dördüncü bölümde ise çeşitli şekillerde fotoelektrokimyasal güneş pili konfigürasyonları değiştirilerek performans ölçümleri karşılaştırılmıştır. Daha sonra Cu(In,Ga)S2 yapısının ön çözelti kaynağı değiştirilerek ve katkılama yapılarak performansın arttırılması amaçlanmıştır. Bölüm 6'da konfigürasyonu tamamlayacak ve sprey piroliz yöntemi ile uygulanabilecek bir elektron taşıyıcı tabaka oluşturabilmek amacıyla çeşitli bileşimlerde ZnO ince film denemeleri yapılmıştır. Son olarak ise kimyasal banyo yöntemi ile üretilen üç boyutlu çinko oksit yapısı üzerine sprey piroliz yöntemi ile Sn-ZnO (TZO) nano kompozit katmanı meydana getirilmiş ve bu yapı üzerine daha önceki bölümlerde karar verdiğimiz en yüksek verime sahip Cu(In,Ga)S2 ve In2S3 konfigürasyonu yine sprey piroliz yöntemi ile uygulanmıştır. Sonuç olarak, yapılan performans analizleri (% IPCE ve ABPE) elde edilen ince filmin % 47.2 kuantum verimi ve % 4.17 foto çevrim verimlerine sahip olduklarını göstermektedir. Bunun yanısıra elde edilen performans sonuçlarının ince filmlerin optik ve morfolojik özellikleri ile ilişkisini incelemek için birçok karakterizasyon yöntemine başvurulmuştur.tr_TR
dc.description.abstractHydrogen energy from photoelectrochemical (PEC) solar cells is considered as a promising candidate due to the increasing global energy demand and limited availability of conventional energy sources based on fossil fuels. In this promising energy field, especially Cu (In,Ga) (S,Se)2 thin films possessing many advantages, are developed by spray pyrolysis method which is one of the most economical production techniques. In this context, after giving a brief introduction for the photoelectrochemical solar cells in the first part of the thesis, the second part gives the information about the thin films prepared in different stoichiometries and resultingly the optimum composition for Cu (In,Ga) (S,Se)2 thin film has been detected. The third chapter contains multi-layered junction composed of Cu (In,Ga) (S,Se)2 and In2S3 thin films which were fabricated via spray pyrolysis and their photoelectrochemical performance measurements. In the fourth chapter, PEC performance measurements have been investigated by altering the configuration of the thin film. Additionally, the precursor sources of the Cu (In,Ga)S2 thin film have been altered in the spray pyrolysis process to detect the optimum conditions for better PEC performance in the fifth part. In order to produce a sufficient electron transport layer, ZnO thin films in various composition have been prepared. In addition to that, 3D ZnO nanostructure thin film has been prepared to be an alternative to spray pyrolysis of ZnO in chapter seven. Later on, Sn-ZnO (TZO) nanocomposite structure has been formed via spray pyrolysis method on zinc oxide structures produced by chemical bath deposition method. The optimal Cu(In,Ga)S2 composition obtained in previous sections combined with In2S3 thin film layers have been followingly applied on the prepared substrates. As a result of the performance measurements, an enhancement of quantum yield efficiency as 47.2 %, applied bias photocurrent efficiency as 4.17 % have been obtained. This enhancement in efficiency has been supported by morphological and optical characterization methods.en_US
dc.language.isotren_US
dc.publisherTOBB ETÜ Fen Bilimleri Enstitüsütr_TR
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectBakır indiyum galyum sülfürtr_TR
dc.subjectİndiyum sülfürtr_TR
dc.subjectÇinko oksittr_TR
dc.subjectSprey piroliztr_TR
dc.subjectFoto elektrokimyasal güneş pilleritr_TR
dc.subjectCopper indium galium sulfideen_US
dc.subjectIndium sulfideen_US
dc.subjectZinc oxideen_US
dc.subjectSprey pyrolysisen_US
dc.subjectPhotoelectrochemical solar cellsen_US
dc.titleSprey piroliz yöntemiyle Cu(In,Ga)(S,Se)2 ince film foto elektrokimyasal güneş hücrelerinin geliştirilmesien_US
dc.title.alternativeDeveloping Cu(In,Ga)(S,Se)2 thin film photoelectrochemical solar cells via spray pyrolysis methoden_US
dc.typeMaster Thesisen_US
dc.departmentInstitutes, Graduate School of Engineering and Science, Micro and Nanotechnology Graduate Programsen_US
dc.departmentEnstitüler, Fen Bilimleri Enstitüsü, Mikro ve Nanoteknoloji Ana Bilim Dalıtr_TR
dc.relation.publicationcategoryTezen_US
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.grantfulltextopen-
item.fulltextWith Fulltext-
item.openairetypeMaster Thesis-
item.cerifentitytypePublications-
item.languageiso639-1tr-
Appears in Collections:Mikro ve Nanoteknoloji Yüksek Lisans Tezleri / Micro- and Nano-Technology Master Theses
Files in This Item:
File Description SizeFormat 
609162 (1).pdfNazire Simay Şahsuvar_Tez7.06 MBAdobe PDFThumbnail
View/Open
Show simple item record



CORE Recommender

Page view(s)

382
checked on Mar 25, 2024

Download(s)

166
checked on Mar 25, 2024

Google ScholarTM

Check





Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.