Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/5993
Full metadata record
DC FieldValueLanguage
dc.contributor.authorÖge, Ahmet Murat-
dc.contributor.authorDurlu, N.-
dc.date.accessioned2021-09-11T15:21:17Z-
dc.date.available2021-09-11T15:21:17Z-
dc.date.issued2013en_US
dc.identifier.citationInternational Powder Metallurgy Congress and Exhibition, Euro PM 2013, 15 September 2013 through 18 September 2013, , 110976en_US
dc.identifier.isbn9781899072408-
dc.identifier.urihttps://hdl.handle.net/20.500.11851/5993-
dc.description.abstractIn this study, the effect of heat treatment on the mechanical properties of two prealloyed powders, Astaloy Mo (Fe-1.5Mo) with 2%Cu and 0.6%C additions and Distaloy DH (Fe-2.0Cu-1.5Mo) with 0.6%C addition was investigated. Powder samples were cold pressed under 600 MPa, and sintered at 1120°C in a nitrogen and hydrogen gas mixture for 45 minutes. Sintered sprecimens were then austenitized at 1070°C under nitrogen atmosphere for 20 minutes and then cooled in air (normalized) , quenched in water and tempered at 200C°C for 20 minutes. The transverse rupture strength and hardness values of the sintered and heat treated samples was measured. Microstructure of the samples was characterized with optical microscopy. In comparison to sintered samples, normalizing slightly changed the macrohardness and transverse rupture strength, whereas quenching increased the macrohardness and reduced the transverse rupture strength due to the formation of fully martensitic microstructures. The study showed that in terms of transverse rupture strengths, heat treatment response of Distaloy DH is better than Astaloy Mo alloy of the same composition.en_US
dc.language.isoenen_US
dc.publisherEuropean Powder Metallurgy Association (EPMA)en_US
dc.relation.ispartofInternational Powder Metallurgy Congress and Exhibition, Euro PM 2013en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectHeat treatmenten_US
dc.subjectMechanical propertiesen_US
dc.subjectNormalizingen_US
dc.subjectPowder metallurgyen_US
dc.subjectPrealloyed powdersen_US
dc.subjectQuenchingen_US
dc.subjectSinteringen_US
dc.subjectTemperingen_US
dc.titleThe effect of heat treatment on the properties of astaloy Mo and distaloy Dh powder alloysen_US
dc.typeConference Objecten_US
dc.departmentFaculties, Faculty of Engineering, Department of Mechanical Engineeringen_US
dc.departmentFakülteler, Mühendislik Fakültesi, Makine Mühendisliği Bölümütr_TR
dc.identifier.scopus2-s2.0-84925014598en_US
dc.institutionauthorDurlu, Nuri-
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.relation.conferenceInternational Powder Metallurgy Congress and Exhibition, Euro PM 2013en_US
item.fulltextNo Fulltext-
item.languageiso639-1en-
item.openairetypeConference Object-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.cerifentitytypePublications-
item.grantfulltextnone-
crisitem.author.dept02.7. Department of Mechanical Engineering-
Appears in Collections:Makine Mühendisliği Bölümü / Department of Mechanical Engineering
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Show simple item record

CORE Recommender

Page view(s)

24
checked on Dec 26, 2022

Google ScholarTM

Check

Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.