Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/6588
Full metadata record
DC FieldValueLanguage
dc.contributor.authorÜbeyli, Mustafa-
dc.contributor.authorAcır, Adem-
dc.contributor.authorKarakaş, M. Serdar-
dc.contributor.authorÖğel, Bilgehan-
dc.date.accessioned2021-09-11T15:42:55Z-
dc.date.available2021-09-11T15:42:55Z-
dc.date.issued2008en_US
dc.identifier.issn1042-6914-
dc.identifier.urihttps://doi.org/10.1080/10426910802385059-
dc.identifier.urihttps://hdl.handle.net/20.500.11851/6588-
dc.description.abstractThe effect of feed rate on tool wear in milling of B(4)C(p) reinforced aluminum metal matrix composites (MMCs), produced by liquid phase sintering method, was investigated. Milling experiments on these composites were conducted with three different types of cementide carbide tools (uncoated, double coated (TiN+TiAlN) and triple coated (TiCN+Al(2)O(3)+TiN)) for three different feed rates of 0.15mm/z, 0.20mm/z, and 0.25mm/z. After milling experiments, an optical microscope was used to measure the magnitude of flank wear on the tools. Flank wear limit value, (V(B))=0.3mm was selected as a reference value for comparison of these tools. On the other hand, tool wear mechanisms were examined with the help of a scanning electron microscope (SEM). Experimental results indicated that higher feed rates led to lower tool wear for all type of tools and coated tools exhibited better performance than uncoated tool with respect to the flank wear.en_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Incen_US
dc.relation.ispartofMaterials And Manufacturing Processesen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAluminum matrixen_US
dc.subjectBoron carbideen_US
dc.subjectBuilt-up-edgeen_US
dc.subjectCoated toolsen_US
dc.subjectCutting speeden_US
dc.subjectDepth-of-cuten_US
dc.subjectFeed rateen_US
dc.subjectFlank wearen_US
dc.subjectMachinabilityen_US
dc.subjectMachiningen_US
dc.subjectMetal-matrix compositesen_US
dc.subjectMillingen_US
dc.subjectPowder metallurgyen_US
dc.subjectSinteringen_US
dc.subjectWearen_US
dc.titleEffect of Feed Rate on Tool Wear in Milling of Al-4% Cu/B(4)C(p) Compositeen_US
dc.typeArticleen_US
dc.departmentFaculties, Faculty of Engineering, Department of Electrical and Electronics Engineeringen_US
dc.departmentFakülteler, Mühendislik Fakültesi, Elektrik ve Elektronik Mühendisliği Bölümütr_TR
dc.identifier.volume23en_US
dc.identifier.issue8en_US
dc.identifier.startpage865en_US
dc.identifier.endpage870en_US
dc.authorid0000-0003-1181-4395-
dc.authorid0000-0002-7809-0283-
dc.identifier.wosWOS:000260260800024en_US
dc.identifier.scopus2-s2.0-54949105422en_US
dc.institutionauthorÜbeyli, Elif Derya-
dc.identifier.doi10.1080/10426910802385059-
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.scopusqualityQ1-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.grantfulltextnone-
item.fulltextNo Fulltext-
item.openairetypeArticle-
item.cerifentitytypePublications-
item.languageiso639-1en-
Appears in Collections:Elektrik ve Elektronik Mühendisliği Bölümü / Department of Electrical & Electronics Engineering
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Show simple item record



CORE Recommender

SCOPUSTM   
Citations

15
checked on Mar 23, 2024

WEB OF SCIENCETM
Citations

16
checked on Mar 9, 2024

Page view(s)

24
checked on Mar 25, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.