Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/6956
Title: Joining of iron based powder metallurgy parts with sintering
Authors: Avşar, Emre
Durlu, Nuri
Ataş, Aytaç
Bozacı, Cengiz
Özdural, Hüsnü
Keywords: Iron based powders
joining with sintering
bond strength
mechanical properties
bond interface
Issue Date: 2010
Publisher: Gazi Univ, Fac Engineering Architecture
Abstract: In this study, joining of iron based green and pre-sintered powder metal parts by sintering was examined. Samples were pressed at 600 MPa and sintered at 1120 degrees C for 45 minutes under reducing (%90N(2) + %10H(2)) and endogas atmospheres. Mechanical properties of iron based powder samples (Fe-%0.6P, Fe-%0.6P-%2Cu, Fe-%0.6P-%3Cu-%0.4C) were measured under green and sintered conditions. In joining with sintering experiments ring-pellet geometry was utilized. Green and pre-sintered ring (Fe-%0.6P, Fe-%0.6P-%2Cu) and pellet (Fe-%0.6P-% 3Cu-%0.4C) samples were joined by sintering and their bonding strengths were measured. The interface formed after sinter joining was examined with optical and scanning electron microscopy. The study show that green parts can be joined by sintering without an appreciable loss in bonding strength.
URI: https://hdl.handle.net/20.500.11851/6956
ISSN: 1300-1884
1304-4915
Appears in Collections:Makine Mühendisliği Bölümü / Department of Mechanical Engineering
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection

Show full item record

CORE Recommender

Page view(s)

22
checked on Dec 5, 2022

Google ScholarTM

Check


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.