Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/7209
Full metadata record
DC FieldValueLanguage
dc.contributor.authorÜbeyli, Mustafa-
dc.contributor.authorAcır, Adem-
dc.contributor.authorKarakaş, M. Serdar-
dc.contributor.authorDemir, Teyfik-
dc.date.accessioned2021-09-11T15:55:58Z-
dc.date.available2021-09-11T15:55:58Z-
dc.date.issued2008en_US
dc.identifier.issn0792-1233-
dc.identifier.issn2191-0359-
dc.identifier.urihttps://hdl.handle.net/20.500.11851/7209-
dc.description.abstractIn this study, the influence of cutting speed, feed rate and type of cutting tools on the surface roughness of the boron carbide particle reinforced aluminum composites in the milling operation was investigated. For this purpose, the composite samples were produced using powder metallurgy route. And then, the milling operations were carried out by using three different cutting tools at various feed rates (0.15, 0.20 and 0.25 mm/z) and cutting speeds (100, 130, 169 and 220 m/min). Experimental results showed that the surface roughness of the composites decreased significantly by increasing the cutting speed for all tools. Moreover, it was gradually increased for all tools when the feed rate was increased at the cutting speeds of 169 and 220 m/min.en_US
dc.language.isoenen_US
dc.publisherWalter De Gruyter Gmbhen_US
dc.relation.ispartofScience And Engineering of Composite Materialsen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectsurface roughnessen_US
dc.subjectmetal matrix compositesen_US
dc.subjectmachiningen_US
dc.subjectmillingen_US
dc.titleOn the surface roughness of Al-4%Cu/B4C metal matrix composites machined by milling operationen_US
dc.typeArticleen_US
dc.departmentFaculties, Faculty of Engineering, Department of Mechanical Engineeringen_US
dc.departmentFakülteler, Mühendislik Fakültesi, Makine Mühendisliği Bölümütr_TR
dc.identifier.volume15en_US
dc.identifier.issue2en_US
dc.identifier.startpage131en_US
dc.identifier.endpage139en_US
dc.authorid0000-0001-6352-8302-
dc.authorid0000-0002-7809-0283-
dc.identifier.wosWOS:000256640200004en_US
dc.identifier.scopus2-s2.0-45849094826en_US
dc.institutionauthorDemir, Teyfik-
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
item.fulltextNo Fulltext-
item.languageiso639-1en-
item.openairetypeArticle-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.cerifentitytypePublications-
item.grantfulltextnone-
crisitem.author.dept02.7. Department of Mechanical Engineering-
Appears in Collections:Makine Mühendisliği Bölümü / Department of Mechanical Engineering
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Show simple item record

CORE Recommender

Page view(s)

24
checked on Dec 26, 2022

Google ScholarTM

Check


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.