Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/9889
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAktas, M.K.-
dc.contributor.authorFarnoud, A.-
dc.date.accessioned2022-12-25T20:52:20Z-
dc.date.available2022-12-25T20:52:20Z-
dc.date.issued2015-
dc.identifier.isbn9.78E+12-
dc.identifier.issn2578-5486-
dc.identifier.urihttps://doi.org/10.1615/ICHMT.2015.IntSympAdvComputHeatTransf.1420-
dc.identifier.urihttps://hdl.handle.net/20.500.11851/9889-
dc.description6th International Symposium on Advances in Computational Heat Transfer , CHT 2015 -- 25 May 2015 through 29 May 2015 -- 269129en_US
dc.description.abstractThis paper presents a two dimensional numerical study of drying of the humid air due to injection of water droplets contrary to the mixture flow direction. Direct contact condensation is the main phenomenon that takes place due to interaction of sub-cooled water droplet and hot moist air. The goal of the investigation is to analyze the temperature and relative humidity distribution at different locations of the channel. The droplet evaporation and condensation are analyzed using ANSYS-FLUENT commercial software. Diameter of water droplets are between 10 µm and 80 µm and mass flow rates of the spray are in the range of 3 g/s and 6 g/s. The analysis predicts that droplet transport and evaporation depend on many parameters such as channel geometry, main stream velocity and temperature, and the injection initial properties. The article investigates the effect of injection water droplet diameter and the mass flow rate. Both radial and axial temperature and relative humidity are discussed. Smaller droplets lead to higher reduction of relative humidity at the outlet compared to larger droplets. Smaller droplets lead to higher condensation rate, particularly at the central core of the chamber. It is also shown that the heat transfer enhances when mass flow rate of the water spray is increased. Accordingly relative humidity decreases and temperature increases at the outlet. Axial and radial temperature and relative humidity profiles are discussed for different cases. © 2021, Begell House Inc. All rights reserved.en_US
dc.language.isoenen_US
dc.publisherBegell House Inc.en_US
dc.relation.ispartofInternational Symposium on Advances in Computational Heat Transferen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.titleNumerical simulation of moisture condensation on water droplets in air flowen_US
dc.typeConference Objecten_US
dc.departmentESTÜen_US
dc.identifier.startpage1456en_US
dc.identifier.endpage1470en_US
dc.identifier.scopus2-s2.0-85120829934en_US
dc.institutionauthor[Belirlenecek]-
dc.identifier.doi10.1615/ICHMT.2015.IntSympAdvComputHeatTransf.1420-
dc.authorscopusid36879006700-
dc.authorscopusid57200130774-
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.identifier.trdiziniden_US]
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.grantfulltextnone-
item.fulltextNo Fulltext-
item.openairetypeConference Object-
item.cerifentitytypePublications-
item.languageiso639-1en-
crisitem.author.dept02.7. Department of Mechanical Engineering-
Appears in Collections:Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Show simple item record



CORE Recommender

Page view(s)

4
checked on Mar 25, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.