| Issue Date | Title | Author(s) |
61 | 2015 | Experimental Determination of Cavitation Characteristics of Hydraulic Turbines | Demirel, Gizem; Aylı, Ece; Çelebioğlu, Kutay ; Taşcıoğlu, Yiğit ; Aradağ, Selin |
62 | 2018 | The experimental investigation of a double pipe heat exchanger installed inside a split-type air-conditioning system | Pramuanjaroenkij, Anchasa; Phankhoksoong, Siriluk; Tongkratoke, Amarin; Kakaç, Sadık |
63 | Jan-2020 | Experimental Investigation of Crack Propagation Mechanisms in Commercially Pure Aluminium Plates | Tekoğlu, Cihan ; Çelik, Ş.; Duran, Hatice ; Efe, M.; Neilsen, K. L. |
64 | 2019 | The Experimental Investigation of Double Pipe Heat Exchangers Prepared from Two Techniques | Tongkratoke, Amarin; Pramuanjaroenkij, Anchasa; Phankhoksoong, Siriluk; Kakaç, Sadık |
65 | 2010 | Experimental investigation of heat transfer and pressure drop for two-phase R134a flow in a 1.65 mm copper tube | Tekin, B.; Kerpiççi, H.; Yazıcıoğlu, Almila Güvenç; Kakaç, S. |
66 | 2015 | Experimental Investigation Of Oscillation Controlled Heat Transport Tubes | Güler, Ömer Faruk; Aktaş, Murat Kadri |
67 | 2016 | Experimental Investigation Of Oscillation Controlled Thermal Transport In Water-Based Nanofluids | Güven, Oğuz; Aktaş, Murat Kadri ; Bayazitoğlu, Yıldız |
68 | 2015 | Experimental Study of Direct Contact Condensation of Steam on Water Droplets | Gümrük, Semra; Aktaş, Murat Kadri |
69 | 2022 | Exploring the Potential of Transfer Learning for Chatter Detection | Ünver, Hakkı Özgür ; Sener, Batihan |
70 | 2020 | Failure Prediction of Composite Open Hole Tensile Test Specimens Using Bond Based Peridynamic Theory | Baykan, Büşra M.; Yolum, Uğur; Özaslan, Emre; Güler, Mehmet Ali ; Yıldırım, Bora |
71 | 2014 | FINITE ELEMENT MODELING OF MICRO-PARTICLE SEPARATION USING ULTRASONIC STANDING WAVES | Büyükkoçak, Süleyman; Çetin, Barbaros; Özer, Mehmet Bülent |
72 | Feb-2008 | The frictional contact problem of sliding rigid parabolic stamps on graded materials | Güler, Mehmet Ali ; Erdoğan, Fazıl; Dağ, Serkan |
73 | 2013 | Hardware-in-the-loop test platform for a small fixed wing unmanned aerial vehicle embedded controller | Ertin O. B.; Korkmaz H.; Kaynak, Ünver ; Kasnakoğlu, Coşku |
74 | Jan-2018 | Heading hold autopilot design for fixed wing aircraft | Akyürek, Şeyma; Kasnakoğlu, Coşku ; Kaynak, Ünver |
75 | 2009 | Heat transfer enhancement by irregular acoustic streaming in a shallow enclosure | Aktaş, Murat Kadri ; Ozgümüş, Türküler |
76 | 2011 | Heat Transfer Enhancement In Laminar Convective Heat Transfer With Nanofluids | Özerinç, Sezer; Kakaç, Sadık ; Yazıcıoğlu, Almila Güvenç |
77 | 2017 | High strain rate deformation of w-ni-fe alloys | Hafızoğlu, Hakan; Kesemen L.; Saran S.; Durlu, N. |
78 | 2007 | The influence of seat structure and passenger weight on the rollover crashworthiness of an intercity coach | Güler, Mehmet Ali ; Elitok, K.; Bayram, Bertan; Stelzmann, U. |
79 | 2020 | Intelligent Chatter Detection in Milling using Vibration Data Features and Deep Multi-Layer Perceptron | Şener, Batıhan; Serin, Gökberk; Güdelek, M. Uğur; Özbayoğlu, Ahmet Murat ; Ünver, Hakkı Özgür |
80 | 2014 | Interaction of Rayleigh-Benard convection and oscillatory flows [Code 119334] | Aktas, Murat Kadri ; Çetindag S. |