Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/3347
Title: Experimental Analysis of Laminar Flow and Heat Transfer in a Multi-Port Finned Minichannel
Authors: Çevrim, Berk
Güvenç Yazıcıoğlu, Almıla
Kakaç, Sadık
Keywords: Fin
Convective Heat Transfer
Laminar
Multi-Port
Nusselt Number
Issue Date: 2016
Publisher: Hitit University Faculty of Engineering
Source: Cevrim, B., Yazicioglu, A. G., & Kakac, S. (2016). Experimental Analysis of Laminar Flow and Heat Transfer in Multi-Port Finned Mini-Channel. Hittite Journal of Science & Engineering, 3(1).
Abstract: Due to their high heat transfer rate, small scale channels have been a popular area of study for the past three decades, especially for heat exchangers. In this study, fluid flow and heat transfer in a multi-port finned minichannel with a rectangular cross section was investigated experimentally under the constant heat flux boundary condition. The minichannel, which has a length of 638 mm, consists of 16 ports, 14 of which are identical finned rectangular channels with a width of 2.10 mm and a height of 5.85 mm while the remaining two ports at the outer edges of the channel were considered to be identical with the other ports. Deionized water was used as the working fluid with Reynolds number ranging between 75 and 190 in a single port. In order to correctly evaluate local heat transfer and friction coefficient values, thermal entrance effects and varying thermo-physical properties of the working fluid were taken into consideration throughout the study. Local Nusselt number varying with dimensionless axial thermal length, friction factor and average Nusselt number values varying with Reynolds number, and temperature distribution along the wall were evaluated to study fluid flow and heat transfer of the finned minichannel. The results were compared to theoretical values and presented graphically. Local Nusselt number values indicated fairly good agreement with theory while friction factor was overestimated. This was considered to be due to the effect of fins. In addition, three correlations were suggested in order to evaluate friction factor, local Nusselt number and average Nusselt number for the minichannel in given ranges of parameters.
URI: https://search.trdizin.gov.tr/yayin/detay/216596
https://hdl.handle.net/20.500.11851/3347
https://www.hjse.hitit.edu.tr/hjse/index.php/HJSE/article/view/HJSE19030000032
ISSN: 2149-2123
Appears in Collections:Makine Mühendisliği Bölümü / Department of Mechanical Engineering
TR Dizin İndeksli Yayınlar / TR Dizin Indexed Publications Collection

Show full item record

CORE Recommender

Page view(s)

32
checked on Dec 26, 2022

Google ScholarTM

Check

Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.