Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/5227
Full metadata record
DC FieldValueLanguage
dc.contributor.authorİyigün, Abdullah-
dc.contributor.authorKocadal, Onur-
dc.contributor.authorİyidiker, Mehmet Akif-
dc.contributor.authorPepe, İsmail Murad-
dc.contributor.authorKızılay, Onur-
dc.contributor.authorDemir, Teyfik-
dc.contributor.authorAktekin, Cem Nuri-
dc.date.accessioned2021-09-11T14:38:48Z-
dc.date.available2021-09-11T14:38:48Z-
dc.date.issued2018en_US
dc.identifier.issn1304-6187-
dc.identifier.urihttps://search.trdizin.gov.tr/yayin/detay/372413-
dc.identifier.urihttps://hdl.handle.net/20.500.11851/5227-
dc.description.abstractPURPOSE: The aim of this study is to biomechanically compare the augmentation techniques used in the surgical treatment of patellar tendon ruptures. MATERIAL AND METHODS: The study was carried out with sixty fresh-frozen bovine knees. Patellar tendon repair was performed with transosseous repair with Krackow or modified - Kessler suturing or suture anchor repair techniques. Dall-Miles cable, cerclage wire or polyester suture material was used for augmentation. each specimen was evaluated biomechanically by cyclic loading and static pullout tests. RESULTS: Significantly lower cyclic elongation values were recorded in the transosseous repair with Krackow suture group (p <0.05) in the comparison of primary repair groups. Lower cyclic elongation and higher maximal tensile strength values were measured in the augmentation with Dall-Miles cable or cerclage wire groups than the other groups. Augmentation groups had higher maximal ten- sile strength values and lower gap formation than non-augmented groups. CONCLUSIONS: In the surgical treatment of patellar tendon rup- tures, augmentation biomechanically strengthens the initial stabi- lity of primary repair. The transosseous repair augmented with the Dall-Miles cable or cerclage wire can be said to be the most biome- chanically stabilizing technique.en_US
dc.description.abstractAMAÇ: Bu çalışmanın amacı patellar tendonun farklı tamir ve augmentasyon tekniklerinin biyomekanik olarak karşılaştırılmasıdır. YÖNTEM: Biyomekanik test, 60 adet dana dizi ile gerçekleştirildi. Dizler tenotomi sonrası titanyum sütür ankor ve polyester sütür ile Krackow ve modifiye Kessler sütürasyon yapılarak transosseoz tünel tekniği ile tamir edildi. Augmentasyon için Ethibond, Dall-Miles kablo ve tel serklaj kullanıldı. Her bir örnek, siklik yüklenme ve statik çekme ile biyomekanik olarak değerlendirildi. BULGULAR: Primer tamir gruplarının karşılaştırılmasında, Krackow sütür ile transosseoz tamir grubunda anlamlı olarak daha düşük siklik uzama değerleri kaydedildi (p <0.05). Dall-Miles kablosu veya serklaj teli ile augmentasyon yapılanlarda diğer gruplara göre daha düşük siklik uzama ve daha yüksek maksimal gerilme kuvveti değerleri ölçüldü. Augmentasyon grupları, augmentasyon yapılmayan gruplardan daha yüksek maksimal gerilme direnci ve daha düşük gap oluşumu sergilemiştir. ÇIKARIMLAR: Patellar tendon yırtıklarının tedavisinde kullanılan augmentasyon teknikleri tespitin stabilitesini kuvvetlendirmektedir. Dall-Miles kablosu veya serklaj teli ile augmente edilen transosseoz onarımın biyomekanik olarak en stabil teknik olduğu söylenebilir.en_US
dc.language.isoenen_US
dc.relation.ispartofAnkara Eğitim ve Araştırma Hastanesi Tıp Dergisien_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titleBiomechanical Comparison Of Repair And Augmentation Techniques In Patellar Tendon Rupturesen_US
dc.title.alternativePatellar Tendon Rüptürlerinde Tamir Ve Augmentasyon Tekniklerinin Biyomekanik Karşılaştırılmasıen_US
dc.typeArticleen_US
dc.departmentFaculties, Faculty of Engineering, Department of Mechanical Engineeringen_US
dc.departmentFakülteler, Mühendislik Fakültesi, Makine Mühendisliği Bölümütr_TR
dc.identifier.volume51en_US
dc.identifier.issue1en_US
dc.identifier.startpage33en_US
dc.identifier.endpage39en_US
dc.institutionauthorDemir, Teyfik-
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.trdizinid372413en_US
item.cerifentitytypePublications-
item.languageiso639-1en-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.openairetypeArticle-
item.fulltextNo Fulltext-
item.grantfulltextnone-
Appears in Collections:Makine Mühendisliği Bölümü / Department of Mechanical Engineering
TR Dizin İndeksli Yayınlar / TR Dizin Indexed Publications Collection
Show simple item record



CORE Recommender

Page view(s)

72
checked on Apr 15, 2024

Google ScholarTM

Check





Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.