Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.11851/9790
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTongkratoke, Amarin-
dc.contributor.authorPramuanjaroenkij, Anchasa-
dc.contributor.authorChaengbamrung, Apichart-
dc.contributor.authorKakac, K.-
dc.date.accessioned2022-12-25T20:46:39Z-
dc.date.available2022-12-25T20:46:39Z-
dc.date.issued2014-
dc.identifier.issn1940-2503-
dc.identifier.issn1940-2554-
dc.identifier.urihttps://doi.org/10.1615/ComputThermalScien.2013006287-
dc.identifier.urihttps://hdl.handle.net/20.500.11851/9790-
dc.description.abstractNanofluids have shown the possibility of enhancing heat transfer performance above its base fluids. This work presents a numerical study that analyzes the nanofluid heat transfer enhancement using different theoretical models; i.e., the effective thermal conductivity and effective viscosity models. The Maxwell, Brownian motion, and Yu and Choi models were considered as the effective thermal conductivity models and these models were used and mixed alternately in the simulation domain, referred to as mixing models. The Al2O3-water nanofluid was chosen in this study and assumed to flow under a laminar, fully developed flow condition through a rectangular pipe such as in a circuit application. The governing equations, written in terms of the primitive variables, were solved through an in-house program using the finite-volume method and the semi-implicit method for pressure linked equations (SIMPLE) algorithm. From the study, the mixing models using Yu and Choi model coupled with Maxwell and Brownian models at the wall boundaries combined with the viscosity model from Maiga provided the numerical results closer to the experimental results from Zeinali Heris and co-workers at volume fractions of 0.01, 0.02, and 0.03%, as well as those of the base fluid. Therefore, by increasing the nanoparticle amounts, volume fraction, effective viscosity, and effective thermal conductivity at the wall region could be increased and enhancements of 0.01, 0.02, and 0.03% volume fractions were 21, 29, and 36% increasing from the base fluid, respectively. This work can strongly support the literature in which the volume fraction, effective viscosity, and effective thermal conductivity can enhance the heat transfer performance in nanofluid flows not only with the single-phase model considered but also with the mixing models examined.en_US
dc.description.sponsorshipDepartment of Mechanical Engineering, Faculty of Engineering, Kasetsart University, Bangkhen Campus; Faculty of Science and Engineering, Kasetsart University, Chalermphrakiat Sakon Nakhon Province Campusen_US
dc.description.sponsorshipThe authors gratefully acknowledge support from the Department of Mechanical Engineering, Faculty of Engineering, Kasetsart University, Bangkhen Campus, and the Faculty of Science and Engineering, Kasetsart University, Chalermphrakiat Sakon Nakhon Province Campus.en_US
dc.language.isoenen_US
dc.publisherBegell House Incen_US
dc.relation.ispartofComputational Thermal Sciencesen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectnanofluiden_US
dc.subjectlaminar flowen_US
dc.subjectheat transfer enhancementen_US
dc.subjectsingle-phase modelen_US
dc.subjectmixing modelen_US
dc.titleNumerical study of nanofluid heat transfer enhancement with mixing thermal conductivity models [Article]en_US
dc.typeArticleen_US
dc.departmentESTÜen_US
dc.identifier.volume6en_US
dc.identifier.issue1en_US
dc.identifier.startpage1en_US
dc.identifier.endpage12en_US
dc.authoridPramuanjaroenkij, Anchasa/0000-0001-9288-7224-
dc.identifier.wosWOS:000214871000001en_US
dc.identifier.scopus2-s2.0-84897801038en_US
dc.institutionauthor[Belirlenecek]-
dc.identifier.doi10.1615/ComputThermalScien.2013006287-
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanen_US
dc.identifier.scopusqualityQ2-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
item.grantfulltextnone-
item.fulltextNo Fulltext-
item.openairetypeArticle-
item.cerifentitytypePublications-
item.languageiso639-1en-
Appears in Collections:Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Show simple item record



CORE Recommender

SCOPUSTM   
Citations

12
checked on Mar 23, 2024

WEB OF SCIENCETM
Citations

7
checked on Mar 9, 2024

Page view(s)

8
checked on Mar 25, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.