| Issue Date | Title | Author(s) |
| 2013 | Hardware-in-the-loop test platform for a small fixed wing unmanned aerial vehicle embedded controller | Ertin O. B.; Korkmaz H.; Kaynak, Ünver ; Kasnakoğlu, Coşku |
| Jan-2018 | Heading hold autopilot design for fixed wing aircraft | Akyürek, Şeyma; Kasnakoğlu, Coşku ; Kaynak, Ünver |
| 2018 | Heat Exchangers | Yazıcıoğlu, A. Güvenç; Aradağ, S.; Aylı, E.; Gülben, G.; Kakaç, S. |
| Jan-2020 | Heat Exchangers : Selection, Rating, and Thermal Design, Fourth Edition | Kakaç, Sadık ; Pramuanjaroenkij, A.; Hongtan, L. |
| 2013 | Heat Pipes and Solid Sorption Transformations Fundamentals and Practical Applications Preface | Vasiliev, L. L.; Kakaç, Sadık |
| 2009 | Heat transfer enhancement by irregular acoustic streaming in a shallow enclosure | Aktaş, Murat Kadri ; Ozgümüş, Türküler |
| Jun-2019 | Heat Transfer Enhancement by Sinusoidal Motion of a Water-Based Nanofluid | Güler, Ömer Faruk; Güven, Oğuz; Aktaş, Murat Kadri |
| 2011 | Heat Transfer Enhancement In Laminar Convective Heat Transfer With Nanofluids | Özerinç, Sezer; Kakaç, Sadık ; Yazıcıoğlu, Almila Güvenç |
| 2022 | Hemodynamic and Structural Comparison of Human Fetal Heart Development Between Normally Growing and Hypoplastic Left Heart Syndrome-Diagnosed Hearts | Salman, Hüseyin Enes ; Kamal, Reema Yousef; Hijazi, Ziyad M.; Yalcin, Huseyin Cagatay |
| 2023 | Hemodynamic effects of intraluminal thrombus burden in an idealized abdominal aortic aneurysm | Kalıpçılar, Alp; Salman, Hüseyin Enes |
| 2011 | Hesaplamalı akışkanlar dinamiği, düşük boyutlu modelleme ve yapay sinir ağları ile akış kontrolü | Aradağ Çelebioğlu, Selin |
| 2017 | High strain rate deformation of w-ni-fe alloys | Hafızoğlu, Hakan; Kesemen L.; Saran S.; Durlu, N. |
| 2009 | Improving the accuracy of vehicle crashworthiness response predictions using an ensemble of metamodels | Acar, Erdem ; Solanki, Kiran N. |
| 2011 | In Celebration Prof. Em. Dr.-Ing. Dr.-Ing. E.h. mult. Franz Mayinger on his 80th birthday | Cotta, R. M.; Dhir, V. K.; Luke, A.; Mewes, D.; Minkowycz, W. J.; Kakaç, Sadık |
| 4-Mar-2015 | Increasing automobile crash response metamodel accuracy through adjusted cross validation error based on outlier analysis | Acar, Erdem |
| 2022 | An industrially viable wavelet long-short term memory-deep multilayer perceptron-based approach to tool condition monitoring considering operational variability | Güdelek, M. Uğur; Serin, Gökberk; Özbayoğlu, Ahmet Murat ; Ünver, Hakkı Özgür |
| 2007 | The influence of seat structure and passenger weight on the rollover crashworthiness of an intercity coach | Güler, Mehmet Ali ; Elitok, K.; Bayram, Bertan; Stelzmann, U. |
| Jan-2016 | An integrated acoustic and dielectrophoretic particle manipulation in a microfluidic device for particle wash and separation fabricated by mechanical machining | Çetin, Barbaros; Özer, Mehmet Bülent ; Cagatay, Erdem; Büyükkocak, Süleyman |
| Apr-2019 | Integrated energy-efficient machining of rotary impellers and multi-objective optimization | Serin, G.; Özbayoğlu, Murat ; Ünver, Hakkı Özgür |
| Jan-2020 | Integration of Dimension Reduction and Uncertainty Quantification in Designing Stretchable Strain Gauge Sensor | Hwang, Sungkun; Görgülüarslan, Recep Muhammet ; Choi, Hae-Jin; Choi, Seung-Kyum |
| 2020 | Intelligent Chatter Detection in Milling using Vibration Data Features and Deep Multi-Layer Perceptron | Şener, Batıhan; Serin, Gökberk; Güdelek, M. Uğur; Özbayoğlu, Ahmet Murat ; Ünver, Hakkı Özgür |
| 2014 | Interaction of Rayleigh-Benard convection and oscillatory flows [Code 119334] | Aktas, Murat Kadri ; Çetindag S. |
| 2021 | Intersonic shear crack propagation using peridynamic theory | Yolum, Uğur; Çöker, Demirkan; Güler, Mehmet Ali |
| 2012 | Investigation and prediction of springback in rotary-draw tube bending process using finite element method | Sözen, Levent; Güler, Mehmet Ali ; Bekar, Deniz; Acar, Erdem |
| 2018 | Investigation of Aeroelastic Stability on AGARD 445.6 Wing at Transonic Regime | Özçatalbaş, Mustafa; Acar, B.; Uslu, Sıtkı |
| Apr-2019 | Investigation of combined effects of cross section, taper angle and cell structure on crashworthiness of multi-cell thin-walled tubes | Altın, Murat; Kılınçkaya, Ümit; Acar, Erdem ; Güler, Mehmet Ali |
| 2013 | Investigation of Flexure Effect on Transfer Alignment Performance | Pehlivanoğlu, A. Güray; Ercan, Yücel |
| 2020 | Investigation of spatial variability on strut diameters of additively manufactured lattice structures | Görgülüarslan, Recep Muhammet ; Utku, Güngör O. |
| 2022 | An investigation of the crashworthiness performance and optimization of tetra-chiral and reentrant crash boxes | Aktas, Cuneyt; Acar, Erdem ; Guler, Mehmet Ali ; Altin, Murat |
| 2015 | Investigation of the effect of co/counter configurations of a double swirler airblast atomizer in an annular turbojet combustor with computational fluid dynamics | Bolat, Hasan Başar; Uslu, S. |
| Aug-2020 | Investigation of the effects of lobe number and configuration on mixing performance in lobed mixer | İper, B.; Ergin, Ç. C.; Cenik, B.; Süer, T. U.; Uslu, Sıtkı |
| 2023 | An investigation on the energy absorption capability of aluminum foam-filled multi-cell tubes | Guler, Mehmet Ali ; Mert, Sinem K.; Altin, Murat; Acar, Erdem |
| 2012 | Irregular acoustic streaming formation in symmetrically heated enclosures | Aktas, Murat Kadri |
| 2013 | An ISA-95-based manufacturing intelligence system in support of lean initiatives | Ünver, Hakkı Özgür |
| 2016 | İçi Boş Ve Içi Alüminyum Esaslı Metalik Köpük Malzeme Ile Doldurulmuş Crash Boxlarının Darbe Enerjisini Sönümleme Yeteneklerinin Incelenmesi | Güler, Mehmet Ali |
| 1-Dec-2014 | İleri Dinamik | Ercan, Yücel |
| 2006 | İmalat hücresinde kullanılan bir robotun işlemlerinin sıralanması | Usta, Yusuf; Ercan, Yücel |
| 2012 | İnelastik malzemelerde martensitik faz dönüşümleri | Özsoy, İstemi Barış |
| 2010 | Joining of iron based powder metallurgy parts with sintering | Avşar, Emre; Durlu, Nuri ; Ataş, Aytaç; Bozacı, Cengiz; Özdural, Hüsnü |
| 2017 | Kampana-tipi ve Disk-tipi Manyetoreolojik Frenlerin Sayısal Yöntemlerle Karşılaştırılması | Taşcıoğlu, Yiğit |
| 2006 | Klasik bir torna tezgahı için bilgisayar kontrollü profil tornalama sistemi geliştirilmesi | Keleş, Ömer; Usta, Yusuf; Yeşilbağ, Y. Yücel; Ercan, Yücel |
| Jan-2022 | Klasik ve Modern Kontrol Sistemi Tasarımı | Ercan, Yücel |
| 2016 | Kuvvet-Geri-Beslemeli Haptik Cihazlar için Döner Manyetoreolojik Sönümleyici Geliştirilmesi | Taşcıoğlu, Yiğit ; Konukseven, Erhan İlhan |
| 2017 | Large-Eddy simulation of a Dual-Mode Scramjet combustor using non-adiabatic Flamelet Modeling | Aksu, T.; Uslu S. |
| 2016 | Large-eddy simulation of a full annular RQL combustion chamber: Fuel distribution effects on the combustor exit temperature profile | Kocaman, Ozan Can; Aksu, T.; Uslu S. |
| 2014 | A Mach-uniform preconditioner for incompressible and subsonic flows | Baş, Onur; Tuncer, İsmail H.; Kaynak, Ünver |
| 2017 | A Manufacturing Energy and GHG Emissions Monitoring System – Supporting Eco-efficiency with Business Intelligence | Ünver, Hakkı Özgür |
| 2012 | Martensitic Phase Transformations in CuAlNi Shape Memory Alloys | Babacan, Nazım; Günel, I; Özsoy, İstemi Barış |
| 2010 | MATERIAL REMOVAL ASPECTS AND CUTTING POWER REQUIREMENT OF PROFILE INDEPENDENT WOOD-MOULDING | Taşcıoğlu, Yiğit ; Jackson, Mike R. |
| 2008 | Mathematical analysis of planar solid oxide fuel cells [Article] | Pramuanjaroenkij, Anchasa; Kakaç, Sadık ; Zhou, Xiang Yang |
| 2008 | Mathematical Analysis of Planar Solid Oxide Fuel Cells [Conference Object] | Pramuanjaroenkij, Anchasa; Kakaç, Sadık ; Zhou, X. Y. |
| 2008 | Mechanical modeling of thin films and cover plates bonded to graded substrates | Güler, Mehmet Ali |
| 2010 | Mechanical modeling of Thin Films Bonded to Functionally Graded Materials | Güler, Mehmet Ali ; Gülver, Yusuf Fuat; Dağ, Serkan |
| Oct-2015 | Mechanics of sliding frictional contact for a graded orthotropic half-plane | Küçüksucu, Ayşegül; Güler, Mehmet Ali ; Avcı, Ahmet |
| 2014 | Microfluidic bio-particle manipulation for biotechnology | Çetin, Barbaros; Özer, Mehmet Bülent ; Solmaz, Mehmet Ertugrul |
| 2009 | Micromechanical modeling of stress-induced phase transformations. Part 1. Thermodynamics and kinetics of coupled interface propagation and reorientation | Levitas, Valery I.; Özsoy, İstemi Barış |
| 2009 | Micromechanical modeling of stress-induced phase transformations. Part 2. Computational algorithms and examples | Levitas, Valery I.; Özsoy, İstemi Barış |
| Aug-2019 | A Micromechanics Based Numerical Investigation of Dual Phase Steels | Yalçınkaya, Tuncay; Güngör, Gönül Öykü; Çakmak, Serhat Onur; Tekoğlu, Cihan |
| 2020 | Microstructural and mechanical characterization of 93W-5.6Ni-1.4Fe alloy | Hafızoğlu, Hakan; Durlu, N. ; Çalışkan N. K. |
| 2013 | Microstructural investigation of sinter hardened distaloy-DH powder alloys | Kılıç, G.; Ögel, B.; Durlu, N. |
| Aug-2018 | Mixed-mode stress intensity factors in a homogeneous orthotropic medium loaded by a frictional sliding rigid flat stamp | Yılmaz, Korhan Babacan; Güler, Mehmet Ali ; Yıldırım, Bora |
| 2020 | Mode II and Mixed Mode Delamination Growth in Composite Materials Using Peridynamic Theory | Gök, Eda; Yolum, Uğur; Güler, Mehmet Ali |
| 2013 | A model for predicting theoretical process energy consumption of rotational parts using STEP AP224 features | Uluer, Muhtar Ural; Ünver, Hakkı Özgür ; Akkuş, K.; Kılıç, Sadık Engin |
| Apr-2017 | Model Testing of Francis-Type Hydraulic Turbines | Kavurmacı, Berat; Çelebioğlu, Kutay ; Aradağ, Selin; Taşcıoğlu, Yiğit |
| Nov-2017 | Modeling and analysis of surface roughness of microchannels produced by mu-WEDM using an ANN and Taguchi method | Jafari, Rahim; Kahya, Müge; Oliaei, Samad Nadimi Bavil; Ünver, Hakkı Özgür ; Özyurt, Tuba Okutucu |
| 1-Jan-2018 | Modeling and experimental evaluation of a rotary peristaltic magnetorheological fluid device with low off-state torque for haptic interfaces | Topçu, Okan; Taşcıoğlu, Yiğit ; Konukseven, Erhan ilhan |
| 2008 | Modeling of thin films and cover plates bonded to graded substrates | Güler, Mehmet Ali ; Erdogan, Fazıl; Dağ, Serkan |
| 2009 | Modeling Of Two-Phase Flow Instabilities In Convective In-Tube Boiling Horizontal Systems | Kakaç, Sadık ; Venkataraman, Muller R.; Pramuanjaroenkij, Anchasa; Kotcioğlu, İsak |
| 2010 | Modeling the effect of structural tests on uncertainty in estimated failure stress | Park, C.; Matsumura, T.; Haftka, R. T.; Kim, N. H.; Acar, Erdem |
| 2021 | Modeling, analysis, and optimization under uncertainties: a review | Acar, Erdem ; Bayrak, Gamze; Jung, Yongsu; Lee, Ikjin; Ramu, Palaniappan; Ravichandran, Suja Shree |
| Oct-2016 | Modelling and optimization of energy consumption for feature based milling | Altıntas, Resul Sercan; Kahya, Müge; Ünver, Hakkı Özgür |
| 2014 | A Multi-Agent System Model for Partner Selection Process in Virtual Enterprise | Sadigh, B. Lotfi; Arıkan, F.; Özbayoğlu, Ahmet Murat ; Ünver, Hakkı Özgür ; Kılıç, S. E. |
| Aug-2020 | Multi-fidelity crashworthiness optimization of a bus bumper system under frontal impact | Acar, Erdem ; Yılmaz, Burak; Güler, Mehmet Ali ; Altın, Murat |
| 2011 | Multi-objective crashworthiness optimization of tapered thin-walled tubes with axisymmetric indentations | Acar, Erdem ; Güler, Mehmet Ali ; Gerceker, B.; Cerit, M. E.; Bayram, B. |
| 2022 | Multi-objective design optimization of additively manufactured lattice structures for improved energy absorption performance | Görgülüarslan, Recep Muhammet |
| 2021 | A Multi-Objective Robust Aircraft Wing Shape Optimization Approach | Demir G.; Görgülüarslan, Recep Muhammet ; Aradag S. |
| 1-Feb-2014 | Multi-objective robust design of energy-absorbing components using coupled process-performance simulations | Najafi, Ali; Acar, Erdem ; Rais-Rohani, Masoud |
| Jun-2016 | Mühendislik Sistemlerinin Dinamiğine Hamilton Prensibi Yaklaşımı | Ercan, Yücel |
| 2013 | Nanoakışkanlarla zorlanmış taşınımla ısı transferinin sayısal analizi | Kakaç, Sadık ; Uzol, Nilay Sezer; Güvenç Yazıcıoğlu, Almila |
| 2006 | A new approximate factorization method suitable for structured and unstructured grids | Çete, R.; Kaynak, Ünver |
| 2007 | Nonlinear Analysis of Metal Cutting Vibration with a Two degree of Freedom Model | Taşkesen, A.; Ercan, Yücel |
| 2010 | Nonzero mean oscillatory flow in symmetrically-heated shallow enclosures: An analysis of acoustic streaming | Aktaş, Murat Kadri ; Ozgümüş, Türküler |
| 2017 | A Novel Alternating Cell Directions Implicit Method for the Solution of Incompressible Navier Stokes Equations on Unstructured Grids | Baş, Onur; Çete, A. R.; Mengi, S.; Tuncer, İsmail H.; Kaynak, Ünver |
| 2020 | A Novel Artificial Pancreas: Energy Efficient Valveless Piezoelectric Actuated Closed-Loop Insulin Pump for T1DM | Kaçar, Alp; Özer, Mehmet Bülent ; Taşcıoğlu, Yiğit |
| 2021 | A novel chatter detection method for milling using deep convolution neural networks | Şener, B.; Güdelek, M. U.; Özbayoğlu, Ahmet Murat ; Ünver, Hakkı Özgür |
| 2016 | A Novel Rotary Magneto-Rheological Damper For Haptic Interfaces | Topçu, Okan; Taşcıoğlu, Yiğit ; Konukseven, Erhan İlhan |
| 2021 | A novel transfer learning framework for chatter detection using convolutional neural networks | Ünver, Hakkı Özgür ; Sener, Batıhan |
| 2013 | Numerical Analysis of Convective Heat Transfer of Nanofluids for Laminar Flow in a Circular Tube | Kirez, Oğuz; Yazıcıoğlu, Almila; Kakaç, Sadık |
| 2010 | Numerical analysis of indirect internal reforming with self-sustained electrochemical promotion catalysts | Pramuanjaroenkij, Anchasa; Zhou, Xiang Yang; Kakaç, Sadık |
| 2012 | Numerical analysis of laminar forced convection with temperature-dependent thermal conductivity of nanofluids and thermal dispersion | Özerinç, Sezer; Yazıcıoğlu, Almila Güvenç; Kakaç, Sadık |
| 2013 | Numerical analysis of transient laminar forced convection of nanofluids in circular ducts | Sert, İsmail Ozan; Uzol, Nilay Sezer; Kakaç, Sadık |
| 2021 | Numerical Investigation of the Fetal Left Heart Hemodynamics During Gestational Stages | Salman, Hüseyin Enes ; Kamal, Reema Yousef; Yalçın, Hüseyin Çağatay |
| 2016 | Numerical investigation of winglets used to improve the flying performance of unmanned aerial vehicle | Kaynak, Ünver ; Çoban, A. B. |
| 2014 | Numerical modeling of ultrasonic particle manipulation for microfluidic applications | Büyükkoçak, Süleyman; Özer, Mehmet Bülent ; Çetin, Barbaros |
| 13-Jul-2017 | Numerical research of cavitation on Francis turbine runners | Çelebioğlu, Kutay ; Altıntaş, Burak; Aradağ, Selin; Taşcıoğlu, Yiğit |
| 2015 | Numerical simulation of moisture condensation on water droplets in air flow | Aktas, M.K. ; Farnoud, A. |
| 2014 | Numerical simulation of Rayleigh Bénard convection in an enclosure: Effect of vibrating side wall | Çetindağ, Semih; Aktaş, Murat Kadri |
| 22-Feb-2018 | Numerical Study of Mixing Thermal Conductivity Models for Nanofluid Heat Transfer Enhancement | Pramuanjaroenkij, Anchasa; Tongkratoke, Amarin; Kakaç, Sadık |
| 2012 | Numerical study of nanofluid heat transfer enhancement with mixing thermal conductivity models [Conference Object] | Tongkratoke, Amarin; Pramuanjaroenkij, Anchasa; Chaengbamrung, Apichart; Kakaç, Sadık |
| 2017 | Numerical Study Of Turbulence Nanofluid Flow To Distinguish Multiphase Flow Models For In-House Programming | Pramuanjaroenkij, Anchasa; Tongkratoke, Amarin; Kakaç, Sadık |
